Showing posts with label Tactical Solutions. Show all posts
Showing posts with label Tactical Solutions. Show all posts

Sunday, October 1, 2017

Eley Action Ammunition Evaluation


Action is the latest ammunition offering from Eley.  Advertised as an all-purpose round, the specifications on this load are identical to Eley Target.  With an advertised velocity of 1090 feet per second, the 40 grain lead round nose bullet leaves the barrel at subsonic velocity for a lower noise shooting experience.  Action is available in single boxes of 50, or the 300 round rec pak which contains six 50 round boxes.  Eley provided a rec pak for this evaluation.

While Action can certainly be used for paper punching, the Action name implies that Eley would like us to use this ammunition for less sedate shooting pastimes.  For me, 22LR action shooting can only mean one thing.  Ringing steel.  I have absolutely no guilt, or remorse, for sending all 300 rounds of Action down range without a single paper target being sacrificed in the process.

I did break out the chronograph to get some velocity data on this load.  Mostly just to check and see if it was subsonic from a 16.5 inch barrel.  Barrels in the 16 to 18 inch range seem to be the most popular for 22LR steel shooting.  My results came out as shown below.  It's definitely subsonic, but I thought the spread between the fastest and slowest rounds was more than I expected.  It really didn't matter though as all of the test shots landed in one thumbprint-sized smudge on the target.

10 Shot Velocity Test
Average Velocity      1046 feet per second
Extreme Spread        54 feet per second
Standard Deviation   16 feet per second

The muzzle velocity and 25-yard accuracy testing rifle and group results.

With the boring stuff out of the way, I set up a couple of cameras and got into action with Eley Action.  If you don't watch the video below, the headline is the ammunition functioned well in the 5 different firearms I used it in.  My only concern with the ammunition is that Eley doesn't spare the bullet lube.  It's more of an oily feeling lube than a sticky wax type of lubrication.  After loading magazines with temperatures in the mid-90s, you will want to wipe off your hands before shooting. 

Direct Link To Video on YouTube


If you watch, or watched, the video.  Don't be put off by my 25 yard pistol results on the small multi-colored 6" steel targets.  I'm afraid I caused my own accuracy problems there when I decided to use 6 different colors of Steel Target Paint from brand new spray cans that had been sitting for 10+ months waiting for a project like this to come along.  The cans are packed with a pound of paint solids and it required several minutes of vigorous shaking to get the six cans ready for spraying.  The targets looked great, but my tired arms did have an impact on my pistol shooting during that video segment.

The Bottom Line
All Eley ammunition is manufactured at their factory in England.  Eley Action ammunition is a premium product and retails at a premium price here in the United States.  Is it worth twice the price of other popular US produced standard velocity target ammunition?  That was a tough question to answer, but Eley recently made their value proposition a whole lot easier to visualize.  https://www.eleyammunition.com is the US website of Eley Ammunition.  On that website you will find a nifty little web app called Eley lot analyzer.

Lot Analyzer allows you to key in your specific lot number of Eley ammunition and see a comprehensive list of quality assurance metrics Eley captured during the testing of your specific lot of ammunition.  The video above has a demonstration of the app.  I'll just add one image I pieced together from two different lot analyzer inquiries below because it really helped me understand how crazy accurate Eley ammunition can be.

A US dime is about .7 inch in diameter.  Fired from factory test barrels, my specific lot of Action ammunition was capable of hitting a dime at 50 meters 99.98% of the time.  Eley Tenex is used by Olympic competitors and a random lot I checked was capable of hitting a dime at 50 meters 100% of the time.  Is Action worth the price?  I say yes when you consider Tenex costs around $20.00 per box of 50 and Action costs about $8.00 per box.  What you are buying is accuracy potential at a greatly discounted price.

Use lot number 3117-30082 if you want to try out the lot analyzer app.

If you are interested in trying Eley Action, you are in luck.  Several new online outlets have started carrying the Eley brand of ammunition.  I've also noticed Eley ammunition on the shelf at some of the larger brick and mortar sporting goods retailers.  If you do try it, leave a comment on this post and let us know what you think.

I wrecked my rec pak, but I'm sure Eley will make more.

Friday, February 24, 2017

Ultimate Lightweight Small Game Rifle



The idea of building the Ultimate Lightweight Small Game Rifle (ULSGR) was hatched last year as I worked through the process of building two race rifles for NSSF Rimfire Challenge and Steel Challenge competitions. After a few false starts, and money down the drain, I landed on a combination of parts that proved to be very light in weight, but still delivered the functionally reliability required for serious timed competitions.

Purpose built for small game hunting at ranges of 25 yards or less, I wanted to build the lightest possible rifle that would function reliably with a variety of ammunition ranging from subsonic to supersonic velocities.  Avoiding the additional weight of add-on optical sights, the rifle would be fitted with windage and elevation adjustable open sights.  It would be built from "match grade" components, and be capable of shooting sub 1 inch 10 shot groups from a bench at 25 yards with ammunition it preferred.

I knew I could complete the ULSGR rifle with a total weight of less than 4 pounds, including a sling and magazine, if I followed the basic recipe I developed for my race rifles.  I set my stretch goal at 3.75 pounds and set about ordering new parts and re-purposing existing parts that I had accumulated during previous builds.  With specific colors in mind, it took several months to get everything I had in mind in all the right colors I wanted.

Completed rifles weighs 3 pounds 10 ounces

Parts List:

After a few false starts on previous builds, caused by not having all the required parts to complete a rifle, I've gotten much better at ordering all the required parts.  If you follow this parts list closely, you should have everything you need to build a complete rifle.

Trigger Assembly - Ruger BX Trigger
Stock - Knoxx Blackhawk! Axiom Coyote Tan
Receiver - Tactical Innovations Elite22F Flattop Matte Black (requires FFL transfer)
Barrel - Tactical Solutions 10/22 Open Sight Threaded Barrel Matte OD Green
V-Block - Tactical Solutions Performance
V-Block Cap Screws (2) - Tactical Innovations Blue
Bolt - Tandemkross "Krossfire"
Bolt Handle - Tactical Innovations Skeletonized
Recoil Buffer - Tandemkross "Shock Block"
Receiver Cross Pins (2) - Tactical Innovations Stainless
Takedown Cap Screw - Tactical Innovations Stainless
Sling - Ten Point Gear Tan/Green Camo
Magazine - Ruger BX Clear

If you went parts shopping today, it would cost around $750 plus shipping and transfer fee to pick up everything on the list.  Watching for sales and free shipping offers might knock a few dollars off the total.  It's not a cheap build, but I can't think of a single thing I would change about the rifle.  There isn't any room for functional or weight reduction improvement.  Also of note, the barrel is threaded just in case the process of purchasing a noise suppressing muzzle attached device is simplified in the future.   

Question Everything:

In my quest to reduce weight, I did comparison testing with several different rifle components after they arrived.  This was more for my own knowledge than anything else.

The first was the receiver.  The Tactical Innovations machined aluminum receiver was nearly an ounce lighter than a standard Ruger 10/22 cast aluminum receiver.  It was also much smoother inside and features a hole in the rear of the receiver where a cleaning rod can be inserted for breech to muzzle cleaning if you wish to do that.


I really like the Volquartsen TG2000 trigger group.  I've been using them for years in several different rifles.  I initially planned to use green one pictured for this rifle.  Before making my final decision, I compared the weights of the Ruger BX trigger and TG2000. Since this will strictly be a hunting rifle, I opted to go with the BX trigger and shave about 2.5 ounces off the build weight.  

The last comparison I wanted to share was the weight difference between the clear and black Ruger BX magazines.  I've always suspected the clear magazines weighed less than the black magazines. They "feel" lighter when you handle them.  Taking two brand new magazines out of the factory packaging, it was neat to see my suspicions were correct.  The clear magazines are 10% lighter than the black magazines.


Assembly:

The most difficult part of assembling the rifle is fitting the barrel.  If you came to the blog to read about the rifle then you are seriously interested in learning more about it, or possibly considering building your own rifle one day.  This video is for you.
 

The rest of the assembly process was very easy.  No additional fitting of parts was required.  A small drop of blue Loctite was required to keep the thread protector from loosening during firing.

On The Range:

As I anticipated, the rifle proved to be a flawless performer on the range.  It chewed through mounds of subsonic, standard, and high velocity ammunition with equal gusto. After two trips to the range, and several hundred rounds of mixed ammunition, I experienced my first failures to eject spent cases with standard velocity ammunition. After a good cleaning, it performed flawlessly again on the next trip to the range.

The 2 pound 10 ounce pull weight of the Ruger BX trigger and fully adjustable open sights both contributed greatly to accurate off-hand shooting at targets out to 50 yards.  The rifle is a plinker's dream come true and several hours of trigger therapy were undertaken in pursuit of this review.  As documented in the video, I had a great time "hunting" my steel critter targets and can't wait to get this rifle out in the woods next Fall.  

Velocity and accuracy testing was done on a portable bench using Caldwell's new Stinger rifle rest.  10 shot velocity averages were captured at 10 feet with a target placed at 25 yards.  The rifle clearly had preferences for some specific ammunition brands and loads over others.  The best groups came from both standard velocity lead round nose and high velocity hollow points.  All of the ammunition used for testing was of good quality, and represented ammunition most commonly used for small game hunting.

My only disappointment, from the range time spent with the rifle, was that I didn't find a good subsonic ammunition choice for the rifle.  I've got others available for testing, but it would have been great if one of the three varieties tested performed as well as the high velocity Mini-Mags.




Finishing Touches:

My initial thought was to use a basic 1" wide nylon web sling for the rifle.  As I was shopping for that sling, I happened to see these paracord wrapped slings.  Available in several different color patterns, this one caught my eye and I made the purchase even though it was contrary to my overall goal of minimizing weight.  I thought it just looked perfect for the rifle so a compromise was made.  It looks great and is perfectly functional even if it does add a couple extra ounces to the final rifle weight.



After my discovery that clear BX magazines weigh less than black BX magazines, I opted to use a clear magazine with the rifle.  I'm not really sure where I initially saw the reference, but I discovered that clear BX magazines can be dyed with common RIT dye.  Using a bottle of Rit DyeMore Sandstone, I ended up with two clear magazines with a rootbeer tint.  More fitting for a hunting rifle.  It doesn't make the magazines special in any way other than I can tell at a glance they belong with the ULSGR.  It was also a fun add-on project with the rifle build.


I'm very pleased with my finished rifle (as if you couldn't tell by now).  I hope the closing photo gives you some perspective on how light the rifle really is.  The partially filled half gallon water jug weighs exactly the same as the rifle.  Sling the rifle over your shoulder and you can easily forget you have it with you as you cross hill and dale in pursuit of small game.  I could have built it cheaper, but I really don't think I could have built it better.  It's a rifle I'm proud of and will enjoy for many years to come.

Total rifle weight is the same as the partially filled water jug.

Sunday, December 11, 2016

Eley Subsonic Hollow 22LR Ammunition Test and Review


Eley Subsonic Hollow is a low-noise small game hunting round from the good folks over in the UK.  As with all Eley ammunition, it sells at a small premium here in the US with a box of 50 running about $10 to $12 at current retail prices.  For the premium price, you get Eley's legendary accuracy and quality control.  Subsonic Hollow features a 40 grain hollow point bullet that has been lubricated with a firm hydrocarbon compound for reliable function in all types of rifles.

I tested Subsonic Hollow in two different rifles.  Scoped with 18.5 inch barrel for accuracy testing.  For gel testing, I used the Ruger 10/22 and also a rifle with a shorter barrel and suppressor.  












Overall test results were very good through the Ruger 10/22.  Accuracy was outstanding and the ammunition functioned reliably.  Gel test results yielded nicely mushroomed hollow point bullets that had impacted the gel block at approximately 915 feet per second.

With the shorter barrel and suppressor, velocities dropped below 900 feet per second and our recovered test rounds showed deformation with incomplete expansion.  From this limited testing, it appears that a velocity of 900 feet per second is needed for the bullet to fully expand in the gel media we used for testing.



Direct link to video on YouTube

My Thoughts:
The most unique thing to come out of this test was actually hearing the bullet strike the gel for the very first time.  Usually the sound is masked by the report of the rifle, but with the addition of the suppressor and subsonic velocity I could clearly hear the smack as bullet impacted gel.

My personal preference is to hunt small game with an ultra-light rifle with 16.5 inch barrel and iron sights.  I like the challenge of stalking or still hunting vs. taking longer shots with a scoped rifle.  I'll need to do some follow up testing with the additional barrel length and verify 25 yard velocities are above 900 feet per second with the 16.5 inch barrel.  If they are, I would certainly add Subsonic Hollow to my short list of low-noise hunting loads.


Thursday, December 8, 2016

Eley Contact Subsonic Semi Auto Ammunition Test


Eley....ammunition supplier of Olympic and World Champions also makes ammunition for the rest of us that hunt, shoot for recreation, and maybe even do a little competition shooting on the weekends.  Contact is one of the most recent Eley products to hit the US market.  This subsonic load was purpose built specifically for reliable function in semi-auto firearms at subsonic velocities.  The ammunition is manufactured by Eley in Birmingham, England and imported by Eley USA.

Contact features a heavier than standard 42 grain round nose bullet that has been coated in a special wax to minimize bullet lube buildup in semi-auto magazines and actions. Contact is a premium priced target load that can currently be found for about 16 cents per round.

For my evaluation, I performed accuracy and velocity testing at 25 yards using a basic Ruger 10/22 rifle with 3-9 power scope.  Gel testing was done at 25 yards with the Ruger 10/22 and also another semi-auto rifle with a short barrel and suppressor.












Direct link to video on YouTube




My Thoughts

Eley Contact hit all the marks I was looking for with accuracy, subsonic velocity in multiple barrel lengths, and 100% reliable function with two different semi-auto rifles. From a practical use perspective, I would consider Contact for small game hunting, varmint, and pest control where deep penetration is desired.  I would also consider using contact for rimfire silhouette competition.



Tuesday, April 19, 2016

My Epic Journey to Build a Rimfire Challenge Limited Class Rifle

When I travel to attend NSSF Rimfire Challenge events it usually involves a significant investment in travel time and related travel expenses. Sure it's great to catch up with old friends, meet new people, and engage in some good old fashioned competition, but the actual trigger time you get at these events is very limited. Setting personal goals for 2016 to attend more Rimfire Challenge events and improve my performance, I decided to build a Limited class rifle and pistol this winter so I could compete in both classes if the shoot organizers allowed me to do so.  I called this my travel once and shoot twice project.

I started my build with some general ideas of things I would like to include on my rifle.  The first requirement was fiber optic sights.  A FO front sight was a must have and also having a FO rear sight would be even better.  The stock had to be adjustable for length of pull and comb height.  I wasn't trying to build the lightest rifle possible, but a lighter rifle would be preferable to a heavier rifle. Finally, I wanted to limit the out of pocket expense to build the rifle by using as many previously acquired components as possible.  I'm not sure about you, but the older I get the more stuff I seem to acquire.  I made fun of my Dad for that when I was young.  I guess this is my payback.

All builds start somewhere and I started with a stripped 10/22 receiver that I scavenged from a generally disappointing Ruger SR-22 Rifle purchased several years ago for Rimfire Challenge events.  I considered reusing the factory bolt and charging handle, but decided against it after polishing on the bolt for a few hours and still marveling at how rough it looked.  Ultimately, I discovered Tactical Innovations while shopping for bolt buffers and decided to give their extra large charging handle and match grade bolt assembly a try.

I previously reviewed ATIs Ruger Charger AR-22 Stock System and liked it.  I picked up their AR-22 TactLite Stock System for 10/22 rifles with the intention of swapping out the shorter Charger handguard for the rifle handguard.  I really liked the fully adjustable stock on the AR-22 TactLite Stock.  The full length picatinny top rail would be a great place to mount the picatinny rail mounted fiber optic sights I finally found available from an airsoft supply house in China. If anyone cares, there is a huge opportunity for someone to make picatinny rail mounted fiber optic sights for rifles.

The barrel installed on the SR-22 receiver was an all steel mid-weight barrel with a seemingly unremovable flash suppressor.  It was replaced with a Tactical Solutions X-Ring barrel.  I also upgraded to the TacSol Performance V-block. While I was ordering these parts from TandemKross, I included their Shock Block bolt buffer, Twister titanium takedown knob, Eagle's Talon extractor, and a Gunsmither Bolt Bar and Extractor Tool.

The green Volquartsen TG2000 replacement trigger housing for 10/22 was something I had on hand. If I remember correctly, it was one of the blemished housings that Volquartsen would occasionally post on a large auction site.  Regardless, it has all the things you want in a match trigger like auto bolt release and extended magazine release.  It also has a crisp 2 pound pull weight.  I really like these trigger assemblies.

The first trip out to the range proved that I had assembled the rifle correctly.  It functioned perfectly, but I could tell the sights were going to be a problem.  Flipped up, the sights are traditional adjustable back up iron sights.  Flipped down, they become fiber optic sights that offered no adjustment.  After trying a few different placements on the rail, I was still 4 inches high and 3 inches left.  I made another range trip and tried various offset risers between the rail and sights, but finally threw in the towel and declared failure.  My limited rifle was a complete bust.

Brian Lawson mentions the Knoxx Axiom stock from Blackhawk! frequently.  This ultra-light stock is a drop in replacement stock for 10/22 rifles.  Before totally giving up on my project, I thought I would give the stock a try.  In place of open sights, I could use the receiver mounted Ruger scope base with a See-All Open Sight and still qualify as Limited class.  Getting this stock was a turning point in the project.

Dropping the barreled action into the new Axiom stock, I was out on the range again with the See-All Open Sight mounted.  I also swapped out the Axiom adjustable stock with the ATI TactLite stock for the adjustable comb feature.  I immediately fell in love with this 4 pound rifle and decided it was my new Open class rifle.  I added a Rimfire Rifle compensator from Allchin Gun Parts and a TandemKross Advantage Charging Handle with picatinny scope base topped off with my Burris FastFire III 8 MOA.

This put me all the way back to square one on the Limited rifle project, but I was much smarter now. I knew exactly what I wanted the rifle to look like and where I needed to go to get all the parts for the second rifle. The only different thing I would need for the new build was a receiver. I decided to try the Elite22 Flat Top Receiver from Tactical Innovations along with the same match bolt and extra large charging handle used in the previous build.

Giving up on front and rear fiber optic sights, I opted again for a Tactical Solutions X-Ring barrel with open sights.  The front sight does come equipped with a fiber optic insert.  The second Volquartsen TG2000 was originally installed in the SR-22 rifle so it was re-purposed for this build.

After a week, I had received all the parts necessary to build the second rifle.  The build came together quickly and I soon had a Limited rifle that weighed in at just under 3.5 pounds.  I've had it out to the range twice for extended practice sessions and it runs like a dream.

It was a long strange trip, but I ultimately ended up exactly where I wanted to go with my Limited rifle build.  Along the way, I found a new Open rifle that I'm very happy with.  Both rifles share many similar components so switching between them should be stress-free.

What I learned from this build process is that I should keep an open mind and be willing to try new things.  I could have given up on the build process many times, but I kept at it and tapped into the collective wisdom of other shooters for their ideas and advice.  I'm really looking forward to using these rifles for the upcoming season.  I'm sure I will see some of you on the firing line.

The Advantage Charging Handle from TandemKross serves two purposes.  It
provides a stable base for optics and allows for left side charging handle operation.
Using similar components on both rifles makes it easy to switch between
 Limited and Open classes.
This simple tool makes 10/22 bolt and extractor removal and replacement a breeze.
Use it once and you will wonder why you didn't get one years ago.  It's awesome. 

Tuesday, November 24, 2015

Competition Shooter Profile - Aimee Williams

Photo by Jake Wyman
Name:  Aimee Williams
Home State:  Idaho
Years Shooting:  4
Years Competing:  3
Competition Types:  Rimfire Challenge, Steel Challenge, USPSA

Notable Awards and Competition Placements:
• 2013 10th place Lady’s Division - Ruger Rimfire Challenge, Parma Rod and Gun Club, Parma, Idaho. Competitors 136.
• 2014 1st place Lady’s Open Division, 2nd place Overall - Shoot for a Cure, (proceeds go to breast cancer screening for underinsured and uninsured women), Nampa Rod and Gun Club, Nampa, Idaho. Competitors 168.
• 2014 4th place Lady’s Open Division, 35th Overall - Idaho NSSF Rimfire Challenge, Parma Rod and Gun Club, Parma, Idaho. Competitors 136.
• 2015 1st place Lady’s Division, 28th Overall – NSSF Rimfire Challenge Northwest Championship, Parma Rod and Gun Club, Parma, Idaho. Competitors 168.
• 2015 1st place Lady’s Rifle Open Division – Season Points Race Idaho Steel Challenge, Nampa Rod and Gun Club, Nampa, Idaho. Competitors 386.
• 2015 1st place Lady’s Pistol Open Division – Season Points Race Idaho Steel Challenge, Nampa Rod and Gun Club, Nampa, Idaho. Competitors 386.
• 2015 4th place Lady’s Open Division, 48th Overall – NSSF Rimfire Challenge World Championship, Old Fort Gun Club, Ft. Smith, Arkansas. Competitors 202.

Photo by Ron Stricklin
NSSF Rimfire Challenge Class Preference:  Open
Gear Rundown:
Pistol – Ruger 22/45 Lite Frame with a Tactical Solutions Pac-Lite 4.5” Threaded Barrel
Allchin Pac-Lite Compensator
Tactical Solutions Pac-Lite Ruger Intergal Scope Base
Tandemkross “Eagle’s Talon” Extractor
Tandemkross Extended Magazine Release
Tandemkross “Firer Starter” Titanium Firing Pin
Tandemkross “Kanewolf” Sling Shot Part Kit
Tandemkross Magazine Disconnect Bushing
Volquartsen  Accurizing Kit
Vortex Optics Red Dot 6MOA

Photo by Ron Stricklin
Rifle – Tactical Solutions X-Ring with Vantage RS Stock
Allchin 22 Rim-Fire Rifle Compensator
Vortex Optics Red Dot 6MOA

Ammunition Preference: CCI Standard Velocity

Sponsors:
Tactical Solutions, Vortex Optics, Tandemkross, Larry’s Sporting Goods, and Allchin Gun Parts

Photo by Oleg Volk
Please describe yourself in 200 words or less.
I grew up in Oregon, Colorado, and Idaho where I have resided since 1982.  My grandparents had a 40 acre farm in Nampa where I spent much of my time.  I grew up an only child and believed that whatever I took on I would give it my all and strive to be the best I could be. I studied at BSU where I earned my BBA in CIS.  I got married and had twin boys, who have grown into amazing young adults.  Working full time at a local hospital and raising twins as a single mother didn't allow much, if any free time.  I'm not complaining, I loved participating at my boys' school and attending their school functions as well as hanging out with them and planning varied experiences with them.  I believe in giving anything I do my all and strive to become the best I can be.

Do you enjoy any other hobbies?
I love spending time with my kids and their friends. I love spending time with my friends and my dog. I enjoy taking photos and traveling.

How did you get started competing in Rimfire Challenge?
It wasn't until I got married and my then husband took me out to do a little bit of target shooting and took me on a few hunting trips.  I still didn't really feel compelled to do more shooting and certainly not on my own.  Time went on and I became a single mother of twin boys who, without consent, became independent young teenagers.  Their father took them shooting and hunting and my boys really wanted to share their enjoyment of shooting with me.  In 2012 my boys took me shooting for Mother's Day!  They were very excited and hopeful I would love shooting.  I was more concerned with being safe and felt a little unsure as they lead me through target shooting.  That was the beginning.  I found a local indoor gun range and set up time for myself to learn to be safe and decided I loved shooting.

In the spring of 2013, I started competing at local Steel Challenge Matches.  I shot my first year of Steel Challenge with that pistol and still have it as the serial numbers coordinate with my son’s birthdate.  That fall I wanted to shoot in the Ruger Rimfire Challenge in Parma, Idaho.  Since I only owed a pistol, the same indoor gun range built a 10/22 rifle for me to compete in that match.  After shooting the Rimfire Challenge I was hooked and wanted to learn how to shoot a rifle.

Photo by Nelson Dymond
Any advice you would like to give to new competitors just starting out with Rimfire Challenge?
Make sure that your rifle stock fits you properly and that you have good equipment. Make sure that your guns like the ammo that you purchase. Decide if you want to shoot Open or Limited and buy equipment accordingly. Ask a lot of question. Have Fun.

How do you practice and prepare for competitions?
Practice every week and sometime several times a week; decide what you are going to practice before you get to the range.

What do you enjoy most about NSSF Rimfire Challenge competition?
I am able to shoot two guns, the camaraderie, the feeling that I have a “shooting family”.

Is there anyone you would like to thank or recognize?
I would like to thank my boys for believing in me and encouraging me to follow my dreams and having confidence in my abilities.  Justin especially encouraged me from the beginning even before I knew I even had any talent shooting.  My dear friend Cindy has been a constant support during my indoor practice sessions.  My fiancĂ© Jim’s support means the world to me.  His knowledge of guns and assistance in getting my equipment and being by my side as my gunsmith is incredible.  Mike for helping me get one of my first sponsorships.  I would especially like to thank Ron Stricklin, who is not only my mentor and coach; he has become a dear friend.  Everyone that is supportive of me and believes in me.

I would also like to thank my sponsors: Tactical Solutions, Chet Alvord; Tandemkross, Bryan Haaker and Jake Wyman; Vortex Optics; Larry’s Sporting Goods; Allchin Gun Parts, John Allchin.

If you would like to know more about Aimee and follow her competition updates, you can find her Facebook Page at Aimee Williams – Competitive Shooter

Monday, October 26, 2015

Competition Shooter Profile - Brian Lawson

Photo by Oleg Volk
Name:  Brian Lawson
Home State:  Washington
Years Shooting:  22
Years Competing:  3
Competition Types:  Rimfire Challenge, Speed Steel, Trap, IDPA

Notable Awards and Competition Placements:
21st Overall 2015 Rimfire Challenge World Championship
4th Overall 2015 Pacific Northwest Speed Championship
15th Overall 2015 NSSF Idaho Rimfire Challenge NW Championship

NSSF Rimfire Challenge Class Preference:  OPEN!

Gear Rundown:
Pistol – Ruger Mark III Frame with 22/45 LITE Upper “MKIII LITE”
Striplin Custom 90° C-More Mount
16MOA C-More Aluminum Railway
TandemKross Game Changer Compensator
TandemKross Titanium Firing Pin
TandemKross Tool Steel Extractor
TandemKross LCI Replacement Panel
Volquartsen Sear
Volquartsen Hammer
Polished Internals

Photo by Oleg Volk
Rifle – Ruger 10/22 Superlite
Tactical Solutions SB-X Barrel
Striplin Custom 90° C-More Mount
12MOA C-More Aluminum Railway
KIDD Single Stage Trigger
KIDD CNC Bolt
KIDD Buffer
BlackHawk! Knoxx Axiom Stock
JWH Custom Charging Handle
Raven Oversized Trigger Group Pins
TandemKross Titanium Takedown Knob
TandemKross 10/22 Mag Bumpers

Ammunition Preference:  CCI Standard Velocity

Sponsors:  TandemKross / Striplin Custom Gunworks

Please describe yourself in 200 words or less.
I was Active Duty Army for 7+ years as an 11B, Infantry, from 2004 to 2011.  My 1st assignment was with the Honor Guard in Washington DC, performing funerals in Arlington National Cemetery.  I was part of Operation Iraqi Freedom from 2008-09, and medically retired from the Army in 2011 out of Fort Bliss, TX.  When I got back to Whidbey Island, I set the video game controller down and hit the range often.  I stumbled across Speed Steel and have been hooked ever since, chronicling my adventures via YouTube as “Lawson11b”.  In November 2015 I will be 3 years free of video games. Shooting matches, cleaning equipment, and becoming a gunsmith fills my days and makes me happy.

Do you enjoy any other hobbies?  YouTube

How did you get started competing in Rimfire Challenge?  Stumbled across a match one day at the range and came to the next one. I’ve been hooked ever since.

Any advice you would like to give to new competitors just starting out with Rimfire Challenge?  Do not buy cheap optics, and buy a LOT of 22LR ammunition.  When it comes time to upgrade your guns, do your homework and read the reviews.  It will save you a lot of time, energy, and money.

How do you practice and prepare for competitions?  My small local matches I do not prepare for aside from confirming zero.  Bigger matches I tend to practice 4-7 days in a row shooting various stages with the help of a mentor.

Is there anything, or anyone, specific that helped you progress from a good competitor to a great competitor?  Yes, becoming sponsored by TandemKross greatly improved my game.  I also have a great mentor, Steve Mooney, who helps me practice for big matches.  We also carpool to the smaller, local matches as well.

What do you enjoy most about NSSF Rimfire Challenge competition?  The people, and the camaraderie.  Nicest group of people you’ll ever find.

Is there anyone you would like to thank or recognize?  Bryan Haaker & Jake Wyman from TandemKross, Steve Mooney, Larry Davis, and Bruce Barchenger.

Want to know more about Brian?  Here are his social media sites.
Lawson11b Facebook: www.facebook.com/Lawson11bravo

Special thanks to Shooting Sports Photographer Oleg Volk.  http://olegvolk.net/blog/  

Friday, September 25, 2015

Competition Ready Upgrades for the Ruger Mark III 22/45


The 2015 NSSF Rimfire Challenge World Championship is right around the corner.  Do you know what that means for this guy?  It means it's time to build a brand new gun for the event.  I went through a similar process last year with a Ruger Mark III.  You can read all about that project on my other blog if you wish to do so.  I was working on a review of the Ruger 22 Charger Takedown at the time of our NSSF Rimfire Challenge State Championship this year so I used it for the pistol portion of the shoot.  Heading into the biggest shoot of the year with brand new equipment isn't the smartest thing for me to be doing, but I favor curiosity over competitiveness.

This new pistol represents a big change for me.  I've always shot in the Limited Class using a heavy all-steel pistol with the stock Ruger target iron sights or the SeeAll Open Sight.  Now I'm going the opposite way with an ultralight pistol with all the bells and whistles allowed in the Open Class.  My 2015 pistol weighs more than a pound less than the pistol I used at the World Championship last year and will have a Burris FastFire III red dot sight.  I'm curious if this new rig will lead to more consistent, and possibly faster, times than I've had in the past.

For the base pistol, I started with a Tactical Solutions TSP-4.  Tactical Solutions doesn't list this pistol in their 2015 catalog, but I found out there were a limited number of these pistols produced for one of the larger firearm distributors.  Tactical Solutions replaces the Ruger factory receiver with their PacLite receiver.  They add a set of their G10 grips, Ruger Racker bolt handle, PacLite scope base, Compensator, and a SLAM Mag base pad equipped magazine to complete the TSP-4 pistol package.

I was a bit surprised to find that, aside from the G10 grips, the grip frame was entirely stock.  Factory Ruger triggers are fine for plinking, but for competition I would need to make some changes.  I acquired parts kits from Volquartsen Custom and TANDEMKROSS to complete my 22/45.  There were some overlapping parts in the two kits so the parts installed are shown in bold type. 


Volquartsen Custom Mark III Accurizing Kit    Retail Price:  $115.00
Target Hammer
Target Sear
Target Trigger
Extended Bolt Release
Trigger Return Spring with Polished Plunger


TANDEMKROSS High Performance Kit for 22/45    Retail Price:  $99.99
Steel Hammer Bushing for the Mark III 22/45
"Kanewolf" Slingshot upgrade

LCI replacement in black OR stainless steel
"Firestarter" Titanium Firing Pin
"Eagle Talon" Extractor
Extended Magazine Release



TANDEMKROSS Victory Trigger    Retail Price:  $34.99
 "Victory" Trigger with Textured Surface

Setting aside several hours one night, I set about making the upgrades.  Since I only attempt projects like this once a year, I tend to be a little slow and methodical with the work.  Using Gun-Guides for Ruger Mark III Series Pistols, instructions included with the TANDEMKROSS kit, and this excellent website I got through the job pretty quickly, but still managed to install the sear on the wrong side of the sear spring.  I make this mistake EVERY SINGLE TIME I work on a Mark III.  Maybe I'll get it right the next time around.  Just in case I forget, I left a Post-it Note reminder for Mr. Dumass in my copy of the Gun-Guide.  I case you were wondering, Mr. Dumass is my alter-ego that does dumb stuff even when I should know better.

My results were right on par with my expectations.  The Ruger factory trigger pull weight of about 5.5 pounds was reduced to slightly more than 2 pounds.  I didn't notice any issues with parts compatibility when mixing and matching parts from the two different parts kits.  I did need to do some fine tuning and testing of the pre-travel and over-travel adjustment screws on the trigger during my first trip out to the range.  I've included a video from my first range trip to demonstrate how the adjustment of the pre-travel screw can have a huge impact on the reliability of the pistol.


Pre-travel Adjustment Demonstration

Direct Link to Video on YouTube

Even though I've only had a limited amount of trigger time with the pistol, I'm really pleased with how it turned out.  With two weeks remaining before the World shoot, I'll be out on the range practicing and becoming more familiar with the pistol as much as I possibly can. 

I hope to meet some of you at the shoot next month.  I'll be the guy with the 22/45 that still has the pink dot stuck to the side of it.